955DQ BRIK Gen III LDT-上海欧逸机电工程设备有限公司

/Upload/images/2020/10/19/1749453517.jpg

- 当前位置：首页
- 产品
- 传感器
- 位移传感器
- 美国GEMCO
美国GEMCO

955DQ BRIK Gen III LDT

The 955DQ BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. It is available in analog, digital, and quadrature outputs. The 955DQ BRIK is an accurate, auto-tuning, non-contact linear displacement transducer in an economical, low profile package with direct quadrature output.

产品介绍

Input Voltage- 13.5 to 30 VDC
Current Draw- 2.5 Watts Maximum, 120 mA @ 15 VDC Typical
Output- Quadrature Output A+, A-, B+, B-, Z+, Z-Line Drivers: 5V or Input Power
Resolution- 0.001”
Non-Linearity- +/- 0.05% of Stroke
Repeatbility- +/- 0.006% of Full Stroke
Hysteresis- +/- 0.02% of Full Scale

Update

50” or less - 1mS (Stroke Lengths 5” - 50”)
51” to 100” - 2mS (Stroke Lengths 51” - 100”)
101” to 150” - 3mS (Stroke Lengths 101” - 150”)
151” to 180” - 4mS (Stroke Lengths 151” - 180”)
Operating Temperature - -20° to 70° C
Span Length- 5” to 180”
Null Zone- 3.00”
Dead Zone- 2.00”
LED- Green = Power is applied and magnet is present. Red = Fault, magnet is in the Dead Zone or lost.
Connector - Standard 12 Pin Micro (Option E)12mm Euro Connectoror 10 Pin HRS (Option H)
Approvals - CE
Enclosure- IP67, IP68 Optional (Connector Option E Only)

上一篇：955C BRIK Gen III LDT
下一篇：955LC BRIK LDT